Publications

Search here for keywords / authors:
Search

2023

• Hot Sheet Metal Forming Strategies for High-Strength Aluminum Alloys: A review – Fundamentals and applications

  E.Scharifi, V.Yardley, U.Weidig, D.Szegda, J.Lin, K.Steinhoff

  External link (https://doi.org/10.1002/adem.202300141)

• Microstructural effects on fatigue crack initiation mechanisms in a near-alpha titanium alloy

  C.Liu, X.Xu, T.Sun, R.Thomas, J.Fonseca, M.Preuss

  External link (https://doi.org/10.1016/j.actamat.2023.118957)

• Computational study of the geometrical influence of grain topography on short crack propagation in AA7XXX series alloys

  C.Grant, Y.Aboura, T.L.Burnett, P.B.Prangnell, P.Shanthraj

  External link (https://doi.org/10.1016/j.mtla.2023.101798)

• Microstructure and mechanical properties of curved AZ31 magnesium alloy profiles produced by differential velocity sideways extrusion

  W.Zhou, J.Lin, T.A.Dean

  External link (https://doi.org/10.1016/j.jma.2022.11.012)

• Cost, range anxiety and future electricity supply: A review of how today’s technology trends may influence the future uptake of BEVs

  W.Zhou, C.J.Cleaver, C.F.Dunant, J.M.Allwood, J.Lin

  External link (https://doi.org/10.1016/j.rser.2022.113074)

• Combined modeling and experimental characterization of Mn segregation and spinodal decomposition along dislocation lines in Fe–Mn alloys

  J.R.Mianroodi, P.Shanthraj, A.Kwiatkowski da Silva, B.Svendsen, D.Raabe

  External link (https://doi.org/10.1016/j.actamat.2023.118873)

• Feasibility study of a novel multi-container extrusion method for manufacturing wide aluminium profiles with low force

  J.Lv, J.Yu, Z.Shi, W.Li, J.Lin

  External link (https://doi.org/10.1016/j.jmapro.2022.11.055)

• Mapping plastic deformation mechanisms in AZ31 magnesium alloy at the nanoscale

  B.Yavuzyegit, E.Avcu, A.D.Smith, J.M.Donoghue, D.Lunt, J.D.Robson, T.L.Burnett, J.Fonseca, P.J.Withers

  External link (https://doi.org/10.1016/j.actamat.2023.118876)

• Analysis of solid-state welding in extruding wide aluminium hollow profiles using a new three-container extrusion system

  J.Lv, Z.Shi, J.Yu, W.Li, J,Lin

  External link (https://doi.org/10.1016/j.jmapro.2023.03.048)

• Microstructural stability and paint bake response of pre-aged AA7075

  Z.Ma, E.Cooksey-Nash, D.Barbier, J.D.Robson

  External link (https://doi.org/10.1016/j.matchar.2023.112862)

• Detecting irradiation-induced strain localisation on the microstructural level by means of high-resolution digital image correlation

  D.Lunt, R.Thomas, D.Bowden, M.T.P.Rigby-Bell, S.de Moraes Shubeita, C.Andrews, T.Lapauw, J.Vleugels, J.Fonseca, K.Lambrinou, P.Frankel

  External link (https://doi.org/10.1016/j.jnucmat.2023.154410)

• Dynamic Precipitation in Supersaturated Al–Zn–Mg–Cu Alloy During Warm Stretching

  J.Robson, P.Jessner, M.aylor, Z.Ma

  External link (https://doi.org/10.1007/s11661-023-06962-9)

• Application of a new method for accurate determination of α and β texture in Ti-6Al-4V from synchrotron diffraction intensities

  C.Daniel, X.Zeng, Š.Michalik, S.Hunt, J.Fonseca

  External link (https://doi.org/10.1016/j.matchar.2023.112769)

• In-situ observation of environmentally assisted crack initiation and short crack growth behaviour of new-generation 7xxx series alloys in humid air

  R.Euesden, Y.Aboura, A.Garner, T. Jailin, C.Grant, Z.Barrett, C.Engel, P.Shanthraj, N.Holroyd, P. Prangnell, T.Burnett

  External link (https://doi.org/10.1016/j.corsci.2023.111051)

• laserbeamFoam: Laser ray-tracing and thermally induced state transition simulation toolkit

  T.Flint, J.Robson, G.Parivendhan, P.Cardiff

  External link (https://doi.org/10.1016/j.softx.2022.101299)

• Interactions between plastic deformation and precipitation in Aluminium alloys: A crystal plasticity model

  M.Bignon, Z.Ma, J.Robson, P.Shanthraj

  External link (https://doi.org/10.1016/j.actamat.2023.118735)

• A novel integrated framework for reproducible formability predictions using virtual materials testing

  A.Plowman, P.Jedrasiak, T.Jailin, P.Crowther, S.Mishra, P.Shanthraj, J.Fonseca

  External link (https://materialsopenresearch.org/articles/2-2/v1 )

• Discontinuous precipitation in Mg-Al alloy studied in 3-dimensions

  J.Robson, M.Lawson, J.Donoghue, J.Guo, A.Davis

  External link (https://doi.org/10.1016/j.scriptamat.2022.115265)

2022

• Microstructure transition gradients in titanium dissimilar alloy (Ti-5Al-5V-5Mo-3Cr/Ti-6Al-4V) tailored wire-arc additively manufactured components

  J.Kennedy, A.Davis, A.Caballero, M.White, J.Fellowes, E.Pickering, P.Prangnell

  External link (https://doi.org/10.1016/j.matchar.2021.111577)

• Optimising large-area crystal orientation mapping of nanoscale β phase in α + β titanium alloys using EBSD

  A.Davis, X.Zeng, R.Thomas, J.Kennedy, J.Donoghue, A.Gholinia, P.Prangnell, J.Fonseca

  External link (https://doi.org/10.1016/j.matchar.2022.112371 )

• The Mechanism Regulating Film Thickness During Porous Anodic Oxide Growth on Aluminium: Transition from Homogeneously Thick Films During Soft Anodizing to Nodules Formation During Hard Anodizing

  J.Qin, M.Curioni

  External link (http://dx.doi.org/10.2139/ssrn.4215623)

• Combined modeling and experimental characterization of Mn segregation and spinodal decomposition along dislocation lines in Fe-Mn alloys

  J.Mianroodi, P.Shanthraj, A.Silva, B.Svendsen, D.Raabe

  External link (https://doi.org/10.48550/arXiv.2206.03767)

• Solid-state hot forge bonding of aluminium-steel bimetallic gears: Deformation mechanisms, microstructure and mechanical properties

  W.Wang, N.Politis, Y.Wang, X.Zhou, D.Balint, J.Jiang

  External link (https://doi.org/10.1016/j.ijmachtools.2022.103930)

• Comparison of Microstructure Refinement in Wire-Arc Additively Manufactured Ti–6Al–2Sn–4Zr–2Mo–0.1Si and Ti–6Al–4V Built With Inter-Pass Deformation

  A.Davis, A.Caballero, R.Biswal, S.Williams, P.Prangnell

  External link (https://doi.org/10.1007/s11661-022-06811-1)

• Exploring effects of property variation on fragmentation of metal rings using a simple model

  J. Robson

  External link (https://doi.org/10.1016/j.dt.2022.08.014)

• New Challenges on Developing Experimental Methods for Innovative Metal Forming Techniques

  R.Zhang, J.Lin

  External link (https://doi.org/10.3390/psf2022004015)

• Microstructural characterisation and mechanical properties of Ti-5Al-5V-5Mo-3Cr built by wire and arc additive manufacture

  A.Caballero, A.Davis, J.Kennedy, J.Fellowes, A. Garner, S.Williams, P.Prangnell

  External link (https://doi.org/10.1080/14786435.2022.2113470)

• An upper bound solution for deformation field analysis in differential velocity sideways extrusion using a unified stream function

  W.Zhou, Z.Shi, J.Lin, T.Dean

  External link (https://doi.org/10.1016/j.ijmecsci.2022.107323)

• Modelling dynamic precipitation in pre-aged aluminium alloys under warm forming conditions

  M.Bignon, P.Shanthraj, J.Robson

  External link (https://doi.org/10.1016/j.actamat.2022.118036)

• A CDM-based unified viscoplastic constitutive model of FLCs and FFLCs for boron steel under hot stamping conditions

  R.Zhang, Z.Shi, V.Yardley, J.Lin

  External link (https://doi.org/10.1177/10567895221105655)

• Transitions in porous oxide morphologies on AA2024-T3 anodized under high currents and low temperatures: Impact on corrosion behaviour

  J.Qin, M.Curioni

  External link (https://doi.org/10.1016/j.electacta.2022.140927)

• Modeling and simulation of microstructure in metallic systems based on multi-physics approaches

  J.Mianroodi, P.Shanthraj, C.Liu, S.Vakili, S.Roongta, N.Siboni, N.Perchikov, Y.Bai, B.Svendsen, F.Roters, D.Raabe, M.Diehl

  External link (https://doi.org/10.1038/s41524-022-00764-0)

• Making sustainable aluminum by recycling scrap: The science of “dirty” alloys

  D.Raabe, D.Ponge, P.Uggowitzer, M.Roscher, M.Paolantonio, C.Liu, H.Antrekowitsch, E.Kozeschnik, D.Seidmann, B.Gault, F.De Geuser, A.Dechamps, C.Hutchinson, C.Liu, Z.Li, P.Prangnell, J.Robson, P.Shanthraj, S.Vakili, C.Sinclair, L.Bourgeois, S.Pogatscher

  External link (https://doi.org/10.1016/j.pmatsci.2022.100947)

• Experimental studies of necking and fracture limits of boron steel sheet under hot stamping conditions

  R.Zhang, Z.Shi, V.Yardley, J.Lin

  External link (https://doi.org/10.1016/j.jmatprotec.2021.117481)

• Finite Element Modeling of Hot Compression Testing of Titanium Alloys

  P.Jedrasiak, H.Shercliff, S.Mishra, C.Daniel, J.Fonseca

  External link (https://doi.org/10.1007/s11665-022-06750-3)

• Understanding the environmentally assisted cracking (EAC) initiation and propagation of new generation 7xxx alloys using slow strain rate testing

  Y.Aboura, A.Garner, R.Euesden, Z.Barrett, C.Engel, N.Holroyd, P.Prangnell, T.Burnett

  External link (https://doi.org/10.1016/j.corsci.2022.110161)

• Unravelling thermal-mechanical effects on microstructure evolution under superplastic forming conditions in a near alpha titanium alloy

  T.Yasmeen, S.Rahimi, C.Hopper, B.Zhao, J.Jiang

  External link (https://doi.org/10.1016/j.jmrt.2022.04.063)

• Multi-dimensional study of the effect of early slip activity on fatigue crack initiation in a near-a titanium alloy

  C.Liu, R.Thomas, T.Sun, J.Donoghue, X.Zhang, T.Burnett, J.Fonseca, M.Preuss

  External link (https://doi.org/10.1016/j.actamat.2022.117967)

• Large-scale serial sectioning of environmentally assisted cracks in 7xxx Al alloys using femtosecond laser-PFIB

  A.Garner, J.Donoghue, R.Geurts, Y.Aboura, B.Winiarski, P.Prangnell, T.Burnett

  External link (https://doi.org/10.1016/j.matchar.2022.111890)

• Modelling of friction stir welded AA2139 aluminium alloy panels in tension and blast

  A.Draup, B.Rodgers, P.Prangnell, Q.Li, M.Lunt, J.Robson

  External link (https://doi.org/10.1016/j.ijimpeng.2022.104163)

• Slip activity during low-stress cold creep deformation in a near-α titanium alloy

  C.Dichtl, D.Lunt, M.Atkinson, R.Thomas, A.Plowman, B.Barzdajn, R.Sandala, J.Fonseca, M.Preuss

  External link (https://doi.org/10.1016/j.actamat.2022.117691)

• Simulating intergranular hydrogen enhanced decohesion in aluminium using density functional theory

  B.Wilson, J.Robson, P.Shanthraj, C.Race

  External link (https://doi.org/10.1088/1361-651X/ac4a23)

• Modelling the Effect of Deformation on Discontinuous Precipitation in Magnesium—Aluminium Alloy

  J.Robson, J.Guo, A.Davis

  External link (https://doi.org/10.3390/alloys1010005)

• CALPHAD-informed phase-field model for two-sublattice phases based on chemical potentials:  eta-phase precipitation in Al-Zn-Mg-Cu alloys

  C.Liu, A.E.Davis, J. Fellowes, P.B.Prangnell, D.Raabe, P.Shanthraj

  External link (https://doi.org/10.1016/j.actamat.2021.117602)

2021

• Alkaline etching and desmutting of aluminium alloy: The behaviour of Mg2Si particles

  Z.Jin, C.Cai, T.Hashimoto, Y.Yuan, D.Kang, J.Hunter, X.Zhou

  External link (https://doi.org/10.1016/j.jallcom.2020.155834)

• Quantifying Processing Map Uncertainties by Modeling the Hot-Compression Behavior of a Zr-2.5Nb Alloy

  C.Daniel, P.Jedrasiak, C.Peyton, J.Fonseca, H.Shercliff, L.Bradley, P.Honniball

  External link (https://www.astm.org/stp162220190031.html)

• A universal mass-based index defining energy efficiency of different modes of passenger transport

  J.Zheng, J.Lin, J.Allwood, T.Dean

  External link (https://doi.org/10.1016/j.ijlmm.2021.06.004)

• The evolution of abnormally coarse grain structures in beta-annealed Ti-6Al%-4V% rolled plates, observed by in-situ investigation

  N.Byres, J.Fonseca, C.Daniel, J.Donoghue, A.Davis, P.Shanthraj, B.Dod, P.Prangnell

  External link (https://doi.org/10.1016/j.actamat.2021.117362)

• Influence of temperature on the corrosion testing of anodized aerospace alloys

  B.Usman, M.Curioni

  External link (https://doi.org/10.1016/j.corsci.2021.109772)

• High-resolution digital image correlation study of the strain localization during loading of a shot-peened RR1000 nickel-based superalloy

  A.Orozco-Caballero, T.Jackson, J.Fonseca

  External link (https://doi.org/10.1016/j.actamat.2021.117306)

• In-situ observation of single variant α colony formation in Ti-6Al-4V

  A.Davis, J.Donoghue, J.Kennedy, N.Byres, P.Prangnell

  External link (https://doi.org/10.1016/j.actamat.2021.117315)

• A comparative study on deformation mechanisms, microstructures and mechanical properties of wide thin-ribbed sections formed by sideways and forward extrusion

  W.Zhou, J.Yu, X.Lu, J.Lin, T.Dean

  External link (https://doi.org/10.1016/j.ijmachtools.2021.103771)

• Understanding the role of local texture variation on slip activity in a two-phase titanium alloy

  D.Lunt, R.Thomas, M.Atkinson, A.Smith, R.Sandala, J.Fonseca, M.Preuss

  External link (https://doi.org/10.1016/j.actamat.2021.117111)

• Stability and stoichiometry of L12 Al3(Sc,Zr) dispersoids in Al-(Si)-Sc-Zr alloys

  T.Dorin, S.Babaniaris, L.Jiang, A.Cassel, C.Race, A.Eggeman, D.Kelly, S.Haigh, J.Robson

  External link (https://doi.org/10.1016/j.actamat.2021.117117)

• Elastic-plastic buckling analysis of stiffened panel subjected to global bending in forming process

  W.Zhou, Z.Shi, Y.Li, Q.Rong, Y.Zeng, J.Lin

  External link (https://doi.org/10.1016/j.ast.2021.106781)

• CALPHAD-informed phase-field modeling of grain boundary microchemistry and precipitation in Al-Zn-Mg-Cu alloys

  C.Liu, A.Garner, H.Zhao, P.Prangnell, B.Gault, D.Raabe, P.Shanthraj

  External link (https://doi.org/10.1016/j.actamat.2021.116966)

• The Effect of Loading Direction on Slip and Twinning in an Irradiated Zirconium Alloy

  R.Thomas, D.Lunt, M.Atkinson, J.Fonseca, M.Preuss, F.Barton, J.O'Hanlon, P.Frankel

  External link (https://www.astm.org/stp162220190027.html)

• A comparative study of plastic deformation mechanisms in room-temperature and cryogenically deformed magnesium alloy AZ31

  K.Zhang, Z.Shao, C.Daniel, M.Turski, C.Pruncu, J.Robson, J.Jiang

  External link (https://doi.org/10.1016/j.msea.2021.140821)

• Preageing of magnesium alloys

  A.Davis, J.Kennedy, D.Lunt, J.Guo, D.Strong, J.Robson

  External link (https://doi.org/10.1016/j.msea.2021.141002)

• Direct observation of the dynamic evolution of precipitates in aluminium alloy 7021 at high strain rates via high energy synchrotron X-rays

  W.Mirihanage, J.Robson, S.Mishra, P.Hidalgo-Manrique, J.Fonseca, C.Daniel, P.Prangnell, S.Michalik, O.Magdysyuk, T.Connolley, M.Drakopoulos

  External link (https://doi.org/10.1016/j.actamat.2020.116532)

• Co-deformation and dynamic annealing effects on the texture development during alpha–beta processing of a model Zr-Nb alloy

  C.Daniel, A.Garner, P.Honniball, L.Bradley, M.Preuss, P.Prangnell, J.Fonseca

  External link (https://doi.org/10.1016/j.actamat.2020.116538)

• Multiscale analysis of grain boundary microstructure in high strength 7xxx Al alloys

  A.Garner, R.Euesden, Y.Yao, Y.Aboura, H.Zhao, J.Donoghue, M.Curioni, B.Gault, P.Shanthraj, Z.Barrett, C.Engel, T.Burnett, P.Prangnell

  External link (https://doi.org/10.1016/j.actamat.2020.10.021)

• Filiform corrosion behaviour on machined AA7150 aluminium alloy

  B.Liu, X.Zhou, X.Zhang

  External link (https://doi.org/10.1016/S1003-6326(20)65360-2)

• Challenges in additive manufacturing of high-strength aluminium alloys and current developments in hybrid additive manufacturing

  S.Altıparmak, V.Yardley, Z.Shi, J.Lin

  External link (https://doi.org/10.1016/j.ijlmm.2020.12.004)

• Quantifying geometrically necessary dislocation density during hot deformation in AA6082 Al alloy

  J.Zheng, C.Pruncu, K.Zhang, K.Zheng, J.Jiang

  External link (https://doi.org/10.1016/j.msea.2021.141158)

• Microstructure and properties of aluminium alloy 6082 formed by the Hot Form Quench process

  P.Hidalgo-Manrique, S.Cao, H.Shercliff, R.Hunt, J.Robson

  External link (https://doi.org/10.1016/j.msea.2021.140751)

• Intergranular corrosion of AA6082 Al–Mg–Si alloy extrusion: The influence of trace Cu and grain boundary misorientation

  X.Zhang, Y.Lv, T.Hashimoto, J.Nilsson, X.Zhou

  External link (https://doi.org/10.1016/j.jallcom.2020.157228)

• An effective method for determining necking and fracture strains of sheet metals

  R.Zhang, Z.Shi, Z.Shao, V.Yardley, J.Lin

  External link (https://doi.org/10.1016/j.mex.2021.101234)

• A novel spatio-temporal method for determining necking and fracture strains of sheet metals

  R.Zhang, Z.Shi, Z.Shao, T.Dean, J.Lin

  External link (https://doi.org/10.1016/j.ijmecsci.2020.105977)

2020

• Quantification of strain fields and grain refinement in Ti-6Al-4V inter-pass rolled wire-arc AM by EBSD misorientation analysis

  A.Davis, J.Hönnige, F.Martina, P.Prangnell

  External link (https://doi.org/10.1016/j.matchar.2020.110673)

• A Review of Microstructural Evolution and Modelling of Aluminium Alloys under Hot Forming Conditions

  J.Lv, J.Zheng, V.Yardley, Z.Shi, J.Lin

  External link (https://doi.org/10.3390/met10111516)

• A CDRX-based material model for hot deformation of aluminium alloys

  Y.Li, B.Gu, S.Jiang, Y.Liu, Z.Shi, J.Lin

  External link (https://doi.org/10.1016/j.ijplas.2020.102844)

• Solving Material Mechanics and Multiphysics Problems of Metals with Complex Microstructures Using DAMASK—The Düsseldorf Advanced Material Simulation Kit

  M.Diehl, D.Wang, C.Liu, J.Mianroodi, F.Han, D.Ma, P.Kok, F.Roters, P.Shanthraj

  External link (https://doi.org/10.1002/adem.201901044)

• Microscopic strain localisation in WAAM Ti-6Al-4V during uniaxial tensile loading

  D.Lunt, A.Ho, A.Davis, F.Martina, J.Hönnige, J.Fonseca, P.Prangnell

  External link (https://doi.org/10.1051/matecconf/202032103008)

• Understanding strain localisation behaviour in a near-α Ti-alloy during initial loading below the yield stress

  C.Dichtl, D.Lunt, R.Thomas, M.Atkinson, M.Thomas, D.Rugg, R.Sandala, J.Fonseca, M.Preuss

  External link (https://doi.org/10.1051/matecconf/202032111039)

• Early slip activity and fatigue crack initiation of a near alpha titanium alloy

  C.Liu, R.Thomas, J.Fonseca, M.Preuss

  External link (https://doi.org/10.1051/matecconf/202032111040)

• Direct Evidence for Dynamic Phase Transformation during High Temperature Deformation in Ti-64

  C.Daniel, C.Nguyen, M.Atkinson, J.Fonseca

  External link (https://doi.org/10.1051/matecconf/202032112037)

• Analysis of the Development of Abnormal Grains Structures During Beta Annealing of Ti-64 Wrought Products

  N.Byres, J.Fonseca, B.Dod, J.Donoghue, A.Davis, P.Prangnell

  External link (https://doi.org/10.1051/matecconf/202032112043)

• The effect of exposure conditions on performance evaluation of post-treated anodic oxides on an aerospace aluminium alloy: Comparison between salt spray and immersion testing

  B.Usman, F.Scenini, M.Curioni

  External link (https://doi.org/10.1016/j.surfcoat.2020.126157)

• Effect of cruciform specimen design on strain paths and fracture location in equi-biaxial tension

  R.Zhang, Z.Shao, Z.Shi, T.Dean, J.Lin

  External link (https://doi.org/10.1016/j.jmatprotec.2020.116932)

• Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution

  A.Heidarzadeh, S.Mironov, R.Kaibyshev, G.Çam, A.Simar, A.Gerlich, F.Khodabakhshi, A.Mostafaei, D.Field, J.Robson, A.Deschamps, P.Withers

  External link (https://doi.org/10.1016/j.pmatsci.2020.100752)

• Deformation Enhanced Diffusion in Aluminium Alloys

  J.Robson

  External link (https://doi.org/10.1007/s11661-020-05960-5)

• Confirmation of rapid-heating β recrystallization in wire-arc additively manufactured Ti-6Al-4V

  A.Davis, A.Caballero, P.Prangnell

  External link (https://doi.org/10.1016/j.mtla.2020.100857)

• Advances in Microstructural Understanding of Wrought Aluminum Alloys

  J.Robson, O.Engler, C.Sigli, A.Deschamps, W.Poole

  External link (https://doi.org/10.1007/s11661-020-05908-9)

• Effects of twin-twin interactions and deformation bands on the nucleation of recrystallization in AZ31 magnesium alloy

  K.Zhang, Z.Shao, J.Jiang

  External link (https://doi.org/10.1016/j.matdes.2020.108936)

• xrdfit: A Python package for fitting synchrotron X-ray diffraction spectra

  Peter Crowther and Christopher S. Daniel

  External link (https://joss.theoj.org/papers/10.21105/joss.02381.pdf)

• Evolution of twinning and shear bands in magnesium alloys during rolling at room and cryogenic temperature

  K.Zhang, J.Zheng, Y.Huang, C.Pruncu, J.Jiang

  External link (https://doi.org/10.1016/j.matdes.2020.108793)

• Effects of die land length and geometry on curvature and effective strain of profiles produced by a novel sideways extrusion process

  W.Zhou, J.Yu, J.Lin, T.Dean

  External link (https://doi.org/10.1016/j.jmatprotec.2020.116682)

• Environmental cracking performance of new generation thick plate 7000-T7x series alloys in humid air

  E.Schwarzenböck, E.Ollivier, A.Garner, A.Cassell, T.Hack, Z.Barrett, C.Engel, T.Burnett, N.Holroyd, J.Robson, P.Prangnell

  External link (https://doi.org/10.1016/j.corsci.2020.108701)

• Investigating the effect of pH on corroding magnesium by dynamic pH sweep coupled with electrochemical measurements.

  M.Curioni, M.Lyu, A.Cioncolini, F.Scenini

  External link (https://doi.org/10.5006/3593)

• The Effectiveness of Grain Refinement by Machine Hammer Peening in High Deposition Rate Wire-Arc AM Ti-6Al-4V

  J.Hönnige, A.Davis, A.Ho, J.Kennedy, L.Neto, P.Prangnell, S.Williams

  External link (https://doi.org/10.1007/s11661-020-05781-6)

• Emerging Hot Topics and Research Questions in Wrought Magnesium Alloy Development

  M.Pérez-Prado, J.Bohlen, S.Yi, D.Letzig, T.Al-Samman, J.Robson, M.Barnett, W.Poole, C.Mendis, S.Agnew, N.Stanford

  External link (https://doi.org/10.1007/s11837-020-04051-5)

• Exploring the use of an AC-DC-AC technique for the accelerated evaluation of anticorrosion performance of anodic films on aluminium alloys

  B.Usman, F.Scenini, M.Curioni

  External link (https://doi.org/10.1016/j.porgcoat.2020.105648)

• The effect of loading direction on strain localisation in wire arc additively manufactured Ti–6Al–4V

  D.Lunt, A.Ho, A.Davis, A.Harte, F.Martina, J.Quinta da Fonseca, P.Prangnell

  External link (https://doi.org/10.1016/j.msea.2020.139608)

• The study of flow behavior and governing mechanisms of a titanium alloy during superplastic forming

  T.Yasmeen, B.Zhao, J.Zheng, F.Tian, J.Lin, J.Jiang

  External link (https://doi.org/10.1016/j.msea.2020.139482)

• Multi-component chemo-mechanics based on transport relations for the chemical potential

  P.Shanthraj, C.Liu, A.Akbarian, B.Svendsen, D.Raabe

  External link (https://doi.org/10.1016/j.cma.2020.113029)

• Element segregation and α2 formation in primary α of a near-α Ti-alloy

  C.Dichtl, Z.Zhang, H.Gardner, P.Bagot, A.Radecka, D.Dye, M.Thomas, R.Sandala, J.da Fonseca, M.Preuss

  External link (https://doi.org/10.1016/j.matchar.2020.110327)

• Comparison of sub-grain scale digital image correlation calculated using commercial and open-source software packages

  D.Lunt, R.Thomas, M.Roy, J.Duff, M.Atkinson, P.Frankel, M.Preuss, J.Quinta da Fonseca

  External link (https://doi.org/10.1016/j.matchar.2020.110271)

• A study of various heating effects on the microstructure and mechanical properties of AA6082 using EBSD and CPFE

  Z.Shao, J.Lee, J.Wang, J.Lin, J.Jiang

  External link (https://doi.org/10.1016/j.jallcom.2019.152921)

• The direct observation of copper segregation at the broad faces of η′ and η precipitates in AA7010 aluminium alloy

  A.M.Cassell J.D.Robson X.Zhou T.Hashimoto M.Besel

  External link (https://doi.org/10.1016/j.matchar.2020.110232)

• FE modelling of small-scale hot deformation testing

  Jedrasiak P.& Shercliff H

  External link (https://www.repository.cam.ac.uk/handle/1810/300723)

• Combining microstructural characterization with crystal plasticity and phase-field modelling for the study of static recrystallization in pure aluminium

  Q.Luan, J.Lee, J.Zheng, C.Hopper, J.Jiang

  External link (https://doi.org/10.1016/j.commatsci.2019.109419)

• Microstructure evolution and deformation texture during rolling of TIMETALⓇ 407

  Gaurav Sing J.Quinta da Fonseca M.Preuss

  External link (https://doi.org/10.1016/j.mtla.2020.100596)

• On the observation of annealing twins during simulating β-grain refinement in Ti–6Al–4V high deposition rate AM with in-process deformation

  J.Donoghue A.E.Davis C.S.Daniel A.Garner F.Martin Quinta da Fonseca P.B.Prangnell

  External link (https://doi.org/10.1016/j.actamat.2020.01.009)

• The τ-plot, a multicomponent 1-D pole figure plot, to quantify the heterogeneity of plastic deformation

  TH.Simma Y.B.Das A.N.Forsey S.Gungor M.E.Fitzpatrick D.G.L.Prakasha R.J.Moat S.Birosca J.Quinta da Fonseca K.M.Perkins

  External link (https://doi.org/10.1016/j.matchar.2019.110114)

• Unveiling the Re effect in Ni-based single crystal superalloys

  X.Wu, S.Makineni, C.Liebscher, G.Dehm, J.Rezaei Mianroodi, P.Shanthraj, B.Svendsen, D.Bürger, G.Eggeler, D.Raabe, B.Gault

  External link (https://doi.org/10.1038/s41467-019-14062-9)

• Microstructural Evolution of Cold-Rolled AA7075 Sheet during Solution Treatment

  L.Wang, X.Yang, J.Robson, R.Sanders, Q.Liu

  External link (https://doi.org/10.3390/ma13122734)

• Experimental and crystal plasticity study on deformation bands in single crystal and multi-crystal pure aluminium

  Q.Luan, H.Xing, J.Zhang, J.Jiang

  External link (https://doi.org/10.1016/j.actamat.2019.11.006)

2019

• Initial plasticity stages in Mg alloys containing Long-Period Stacking Ordered phases using High Resolution Digital Image Correlation (HRDIC) and in-situ synchrotron radiation

  G.Garcés A.Orozco-Caballero J.Quinta da Fonseca P.Pérez J.Medina A.Stark N.Schell P.Adeva

  External link (https://doi.org/10.1016/j.msea.2019.138716)

• Back-stresses and geometrical hardening as competing mechanisms enhancing ductility in HCP metals

  D.Esqué-de los Ojos T.Nguyen Orozco-Caballero G.Timára J.Quinta da Fonseca

  External link (https://doi.org/10.1016/j.msea.2018.05.046)

• How magnesium accommodates local deformation incompatibility: A high-resolution digital image correlation study

  Alberto Orozco-Caballero David Lunt Joseph D.Robson JoãoQuinta da Fonseca

  External link (https://doi.org/10.1016/j.actamat.2017.05.040)

• Initiation and short crack growth behaviour of environmentally induced cracks in AA5083 H131 investigated across time and length scales

  VisweswaraC.Gudla Alistair Garner Malte Storm Parmesh Gajjar James Carr Benjamin C. Palmer John J. Lewandowski Philip J. Withers N. J. Henry Holroyd Timothy L. Burnett

  External link (https://doi.org/10.1515/corrrev-2019-0044)

• Precipitation sequence in Al–Mg–Si–Sc–Zr alloys during isochronal aging

  T.Dorin M. Ramajaya S.Babaniaris Lu.Jiang T.J.Langan

  External link (https://doi.org/10.1016/j.mtla.2019.100437)

• On the interaction of precipitates and tensile twins in magnesium alloys

  C.Liu P.Shanthraj J.D.Robson M.Diehl S.Donga J.Donga W.Ding D.Raabe

  External link (https://doi.org/10.1016/j.actamat.2019.07.046)

• A type of cruciform specimen applied to evaluate forming limits for boron steel under hot stamping conditions

  R.Zhang, Z.Shao, J.Lin

  External link (https://doi.org/10.1088/1757-899X/651/1/012087)

• Experimental investigations of stress-relaxation ageing behaviour of AA6082

  Qi Rong Yong Li Zhusheng Shi Lichu Meng Xiaohong Sun Xiaoguang Jianguo Lin

  External link (https://doi.org/10.1016/j.msea.2019.02.043)

• Effect of pin arrangement on formed shape with sparse multi-point flexible tool for creep age forming

  YongLi Zhushen Shi Qi Rong Wenbin Zhou Jianguo Lin

  External link (https://doi.org/10.1016/j.ijmachtools.2019.03.001)

• An accelerated springback compensation method for creep age forming

  Yong Li Qi Rong Zhusheng Shi Xiaoguang Sun Lichun Meng Jianguo Lin

  External link (https://doi.org/10.1007/s00170-018-3175-3)

• Manufacturing a curved profile with fine grains and high strength by differential velocity sideways extrusion

  Wenbin Zhou JunquanYu Jianguo Lin Trevor A.Dean

  External link (https://doi.org/10.1016/j.ijmachtools.2019.03.002)

• Effect of Dispersoids on the Microstructure Evolution in Al–Mg–Si Alloys

  Michael Kenyon Joseph Robson Jonathan Fellowes Zeqin Liang

  External link (https://doi.org/10.1002/adem.201800494)

• The Effect of Precipitates on Twinning in Magnesium Alloys

  Joseph D. Robson Matthew R. Barnett

  External link (https://doi.org/10.1002/adem.201800460)

• Analytical electron microscopy of grain boundary segregation: Application to Al-Zn-Mg-Cu (7xxx) alloys

  J.D.Robson

  External link (https://doi.org/10.1016/j.matchar.2019.06.016)

• Interfacial Segregation of Alloying Elements During Dissimilar Ultrasonic Welding of AA6111 Aluminum and Ti6Al4V Titanium

  Chaoqun Zhang Joseph D. Robson Sarah J. Haigh Philip B. Prangnell

  External link (https://doi.org/10.1007/s11661-019-05395-7)

• Nickel fluoride as a surface activation agent for electroless nickel coating of anodized AA1050 aluminum alloy

  M.Kocabaş C.Örnek M.Curioni N.Cansever

  External link (https://doi.org/10.1016/j.surfcoat.2019.03.003)

• Incorporation of alloying elements into porous anodic films on aluminium alloys: The role of cell diameter

  J.M.Torrescano-Alvarez M.Curioni H.Habazaki T.Hashimoto P.Skeldon X.Zhou

  External link (https://doi.org/10.1016/j.electacta.2018.11.041)

• Modelling of heat generation in linear friction welding using a small strain finite element method

  P.Jedrasiak H.R.Shercliff

  External link (https://doi.org/10.1016/j.matdes.2019.107833)

• An experimental investigation of the drawability of AA6082 sheet under different elevated temperature forming processes

  Kailun Zheng Lei Zhu Jianguo Lin Trevor A.Dean Nan Li

  External link (https://doi.org/10.1016/j.jmatprotec.2019.05.006)

• An atomic scale structural investigation of nanometre-sized η precipitates in the 7050 aluminium alloy

  Tsai-Fu Chung Yo-Lun Yang Makoto Shiojiri Chien-Nan Hsiao Wei-Chih Li Cheng-Si Tsao Zhusheng Shi Jianguo Lin Jer-RenYang

  External link (https://doi.org/10.1016/j.actamat.2019.05.041)

• Experimental investigation of the viscoplastic behaviours and microstructure evolutions of AZ31B and Elektron 717 Mg-alloys

  Kai Zhang Jing-Hua Zheng Zhuta Shaoa Catalin Pruncu Mark Turski Carlos Guerini Jun Jiang

  External link (https://doi.org/10.1016/j.matdes.2019.108160)

• The effect of hot form quench (HFQ®) conditions on precipitation and mechanical properties of aluminium alloys

  Kailun Zheng Yangchun Dong Jing-Hua Zheng Alistair Foster Jianguo Lin Hanshan Dong Trevor A.Dean

  External link (https://doi.org/10.1016/j.msea.2019.06.027)

• Experimental investigation of novel fast–ageing treatments for AA6082 in supersaturated solid solution state

  Jing-Hu Zhenga Yangchun Dong Kailun Zheng Hanshan Dong Jianguo Lin Jun Jiang Trevor A.Dean

  External link (https://doi.org/10.1016/j.jallcom.2019.151934)

• The effect of multiple precipitate types and texture on yield asymmetry in Mg-Sn-Zn(-Al-Na-Ca) alloys

  A.E.Davis J.D.Robson M.Turski

  External link (https://doi.org/10.1016/j.actamat.2018.07.044)

• Reducing yield asymmetry and anisotropy in wrought magnesium alloys – A comparative study

  A.E.Davis J.D.Robson M.Turski

  External link (https://doi.org/10.1016/j.msea.2018.12.060)

• Automated image mapping and quantification of microstructure heterogeneity in additive manufactured Ti6Al4V

  Hao Zhao Alistair Ho Alec Davis Alphons Antonysamy PhilipPrangnell

  External link (https://doi.org/10.1016/j.matchar.2018.10.027)

• On the origin of microstructural banding in Ti-6Al4V wire-arc based high deposition rate additive manufacturing

  Alistair Ho Hao Zhao Jon W.Fellowes Filomeno Martina Alec E.Davis Philip B.Prangnell

  External link (https://doi.org/10.1016/j.actamat.2018.12.038)

• Mechanical performance and microstructural characterisation of titanium alloy-alloy composites built by wire-arc additive manufacture

  A.E.Davis C.I.Breheny J.Fellowes U.Nwankpa F.Martina J.Ding T.Machry P.B.Prangnell

  External link (https://doi.org/10.1016/j.msea.2019.138289)

• Atomistic phase field chemomechanical modeling of dislocation-solute-precipitate interaction in Ni–Al–Co

  Jaber Rezaei Mianroodi Pratheek Shanthraj Paraskevas Kontisa Jonathan Cormier Baptiste Gault Bob Svendsen Dierk Raabe

  External link (https://doi.org/10.1016/j.actamat.2019.06.008)

• Identification of active slip mode in a hexagonal material by correlative scanning electron microscopy

  X.Xu, D.Lunt, R.Thomas, R.Babu, A.Harte, M.Atkinson, J.da Fonseca, M.Preuss

  External link (https://doi.org/10.1016/j.actamat.2019.06.024)

• A detailed study of texture changes during alpha–beta processing of a zirconium alloy

  Christopher S.Daniel Peter D.Honniball LukeBradley MichaelPreussa JoãoQuinta da Fonsecaa

  External link (https://doi.org/10.1016/j.jallcom.2019.06.338)

• Interaction Between Precipitate Basal Plates and Tensile Twins in Magnesium Alloys

  P. Hidalgo-Manrique J. D. Robson

  External link (https://doi.org/10.1007/s11661-019-05301-1)

• Work hardening of titanium: new insights from nanoindentation

  Arnas Fitzner Jack Palmer Ben Gardner Matthew Thomas Michael Preuss João Quinta da Fonseca

  External link (https://doi.org/10.1007/s10853-019-03431-w)

• A novel manufacturing process and validated predictive model for high-strength and low-residual stresses in extra-large 7xxx panels

  Jing-Hua Zheng Ran Pan Robert C.Wimpory Jianguo Lin Chen Li Catrin M.Davies

  External link (https://doi.org/10.1016/j.matdes.2019.107767)

• Corrosion behaviour of AA6082 Al-Mg-Si alloy extrusion: The influence of quench cooling rate

  Xinxin Zhang Xiaorong Zhou Jan-OlovNilsson

  External link (https://doi.org/10.1016/j.corsci.2019.01.030)

• Dispersoid composition in zirconium containing Al-Zn-Mg-Cu (AA7010) aluminium alloy

  A.M.Cassell J.D.Robson C.P.Race A.Eggeman T.Hashimoto M.Besel

  External link (https://doi.org/10.1016/j.actamat.2019.02.047)

2018

• A novel constitutive model for multi-step stress relaxation ageing of a pre-strained 7xxx series alloy

  Jing-Hua Zheng Jianguo Lin Junyi Lee Ran Pan Chen Lib Catrin M.Davies

  External link (https://doi.org/10.1016/j.ijplas.2018.02.008)

• Corrosion behaviour of AA6082 Al-Mg-Si alloy extrusion: Recrystallized and non-recrystallized structures

  Xinxin Zhang Xiaorong Zhou Jan-Olov Nilsson Zehua Dong Changrun Cai

  External link (https://doi.org/10.1016/j.corsci.2018.08.047)

• Upper bound analysis of differential velocity sideways extrusion process for curved profiles using a fan-shaped flow line model

  W. Zhou, Z. Shi, J. Lin

  External link (https://doi.org/10.1016/j.ijlmm.2018.03.004)

• FE simulation of asymmetric creep-ageing behaviour of AA2050 and its application to creep age forming

  Y. Li, Z. Shi, J. Lin, Y.-L. Yang, P. Saillard, R. Said

  External link (https://doi.org/10.1016/j.ijmecsci.2018.03.003)

• Transmission electron microscopy investigation of separated nucleation and in-situ nucleation in AA7050 aluminium alloy

  T.-F. Chung, Y.-L. Yang, B.-M. Huang, Z. Shi, J. Lin, T. Ohmura, J.-R. Yang

  External link (https://doi.org/10.1016/j.actamat.2018.02.045)

• Experimental investigations of the in-die quenching efficiency and die surface temperature of hot stamping aluminium alloys

  K. Zheng, J. Lee, W. Xiao, B. Wang, J. Lin

  External link (https://doi.org/10.3390/met8040231)

• Feasibility studies of a novel extrusion process for curved profiles: Experimentation and modelling

  W. Zhou, J. Lin, T.A. Dean, L. Wang

  External link (https://doi.org/10.1016/j.ijmachtools.2017.12.001)

• Experimental investigation of multi-step stress-relaxation-ageing of 7050 aluminium alloy for different pre-strained conditions

  J.-H. Zheng, R. Pan, C. Li, W. Zhang, J. Lin, C.M. Davies

  External link (https://doi.org/10.1016/j.msea.2017.10.066)

• Effect of machining-induced residual stress on springback of creep age formed AA2050 plates with asymmetric creep-ageing behaviour

  Y. Li, Z. Shi, J. Lin, Y.-L. Yang, P. Saillard, R. Said

  External link (https://doi.org/10.1016/j.ijmachtools.2018.05.003)

• Static recrystallization study on pure aluminium using crystal plasticity finite element and phase-field modelling

  Q. Luan, J. Lee, Z. Zheng, J. Lin, J. Jiang

  External link (https://doi.org/10.1016/j.promfg.2018.07.211)

• Effects of oxygen evolution on the voltage and film morphology during galvanostatic anodizing of AA 2024-T3 aluminium alloy in sulphuric acid at −2 and 24 °C

  J.M. Torrescano-Alvarez, M. Curioni, P. Skeldon

  External link (https://doi.org/10.1016/j.electacta.2018.03.121)

• A mathematical description accounting for the superfluous hydrogen evolution and the inductive behaviour observed during electrochemical measurements on magnesium

  M. Curioni, L. Salamone, F. Scenini, M. Santamaria, M. Di Natale

  External link (https://doi.org/10.1016/j.electacta.2018.04.116)

• Effect of anodizing conditions on the cell morphology of anodic films on AA2024-T3 alloy

  J.M. Torrescano-Alvarez, M. Curioni, X. Zhou, P. Skeldon

  External link (https://doi.org/10.1002/sia.6562)

• Relationship between the inductive response observed during electrochemical impedance measurements on aluminium and local corrosion processes

  Y. Yang, F. Scenini, N. Stevens, M. Curioni

  External link (https://doi.org/10.1080/1478422X.2018.1521591)

• Complete long-term corrosion protection with chemical vapor deposited graphene

  F. Yu, L. Camilli, T. Wang, D.M.A. Mackenzie, M. Curioni, R. Akid, P. Bøggild

  External link (https://doi.org/10.1016/j.carbon.2018.02.035)

• Effect of fluorozirconic acid on anodizing of aluminium and AA 2024-T3 alloy in sulphuric and tartaric-sulphuric acids

  R. Elaish, M. Curioni, K. Gowers, A. Kasuga, H. Habazaki, T. Hashimoto, P. Skeldon

  External link (https://doi.org/10.1016/j.surfcoat.2018.02.096)

• Correlation between electrochemical impedance measurements and corrosion rates of Mg-1Ca alloy in simulated body fluid

  Y. Liu, M. Curioni, Z. Liu

  External link (https://doi.org/10.1016/j.electacta.2018.01.121)

• The Effectiveness of Al-Si coatings for preventing interfacial reaction in Al-Mg dissimilar metal welding

  Y. Wang, B. Al-Zubaidy, P.B. Prangnell

  External link (https://doi.org/10.1007/s11661-017-4341-1)

• Evaluation of Zn-rich coatings for IMC reaction control in aluminium-magnesium dissimilar welds

  Y. Wang, P.B. Prangnell

  External link (https://doi.org/10.1016/j.matchar.2018.02.035)

• The influence of strain path on rare earth recrystallization textures in a Magnesium-Zinc-Rare Earth Alloy

  D. Griffiths, B. Davis, J.D. Robson

  External link (https://doi.org/10.1007/s11661-017-4404-3)

• The influence of grain structure on intermetallic compound layer growth rates in Fe-Al dissimilar welds

  L. Xu, J.D. Robson, L. Wang, P.B. Prangnell

  External link (https://doi.org/10.1007/s11661-017-4352-y)

• Understanding precipitate evolution during friction stir welding of Al-Zn-Mg-Cu alloy through in-situ measurement coupled with simulation

  J.F. dos Santos, P. Staron, T. Fischer, J.D. Robson, A. Kostka, P. Colegrove, H. Wang, J. Hilgert, L. Bergmann, L.L. Hütsch, N. Huber, A. Schreyer

  External link (https://doi.org/10.1016/j.actamat.2018.01.020)

• Quantification of strain localisation in a bimodal two-phase titanium alloy

  D. Lunt, X. Xu, T. Busolo, J. Quinta da Fonseca, M. Preuss

  External link (https://doi.org/10.1016/j.scriptamat.2017.10.012)

• Analysis and modelling of a novel process for extruding curved metal alloy profiles

  W. Zhou, J. Lin, T.A. Dean, L. Wang

  External link (https://doi.org/10.1016/j.ijmecsci.2018.02.028)

• A review on modelling techniques for formability prediction of sheet metal forming

  R.Zhang, Z.Shao, J.Lin

  External link (https://doi.org/10.1016/j.ijlmm.2018.06.003)

• Cold rolling influence on residual stresses evolution in heat-treated AA7xxx T-section panels

  Ran. Pan Jinghua Zeng Zipeng Zhang Jianguo Lin

  External link (https://doi.org/10.1080/10426914.2018.1512121)

2017

• Investigation of residual stress distribution and texture evolution in AA7050 stationary shoulder friction stir welded joints

  T. Sun, A.S. Tremsin, M.J. Roy, M. Hofmann, P.B. Prangnell, P.J. Withers

  External link (https://doi.org/10.1016/j.msea.2017.12.019)

• Discontinuous yielding in wrought magnesium

  G. Timár, M.R. Barnett, J.Q. da Fonseca

  External link (https://doi.org/10.1016/j.commatsci.2017.02.010)

• Effect of nanoscale α 2 precipitation on strain localisation in a two-phase Ti-alloy

  D. Lunt, T. Busolo, X. Xu, J. Quinta da Fonseca, M. Preuss

  External link (https://doi.org/10.1016/j.actamat.2017.02.068)

• The significance of intermetallic compounds formed during interdiffusion in aluminum and magnesium dissimilar welds

  Y. Wang, P.B. Prangnell

  External link (https://doi.org/10.1016/j.matchar.2017.09.040)

• Selected Cr(VI) replacement options for aluminum alloys: a literature survey

  D.B. Mitton, A. Carangelo, A. Acquesta, T. Monetta, M. Curioni, F. Bellucci

  External link (https://doi.org/10.1515/corrrev-2016-0059)

• The influence of porosity on fatigue crack initiation in additively manufactured titanium components

  S. Tammas-Williams, P.J. Withers, I. Todd, P.B. Prangnell

  External link (https://doi.org/10.1038/s41598-017-06504-5)

• The Influence of Extended and Variable Pre-Stretching on the Strength of AA2195 Alloy Taper-Rolled Plates

  B.I. Rodgers, R.J. Cinderey, P.B. Prangnell

  External link (https://doi.org/10.4028/www.scientific.net/MSF.877.205)

• Microscopic strain localisation in Ti-6Al-4V during uniaxial tensile loading

  D. Lunt, J.Q. da Fonseca, D. Rugg, M. Preuss

  External link (https://doi.org/10.1016/j.msea.2016.10.099)

• Measurement and modelling of textures in flow formed Cr-Mo-V steel tubes

  D. Tsivoulas, J.Q. da Fonseca, M. Tuffs, M. Preuss

  External link (https://doi.org/10.1016/j.msea.2016.12.115)